本文へスキップ

Bonds Corporation is the trading company which imports and exports the products of ceramics, quartz, sapphire, gas control products and so on.

TEL : +81-6-6846-0111

4-25-1, Miyayama-cho, Toyonaka-shi,
OSAKA,560-0056, Japan

SERVICE&PRODUCTS


PRODUCTS: : Ceramics

< Raw Materials Div >

For the semiconductor, abrasive, refractory and other various markets, we can provide.

1. Ceramics Powder & Coating Materials


a) Silicon Carbide (SiC)

- Features -

Low density and High strength Heat resistance, Wear resistance, Chemical resistanceAcid resistance, Low thermal expansion coefficient, High thermal conductivity, Strong for thermal change Good electrical conductivity

* Not only for the abrasive and refractory Materials and Products, but also providing as the sintered material, green silicon carbide.

**We can provide by JIS standard.


b) Boron Carbide (B4C)

We can provide powders with the particle sizes what you want.


c) BSP Coating

BSP coating was developed by Zhengxing Abrasive and it is a kindly completely new, green and safe material.

-Features-

Excellent chemical stability.
Neutron absorption of Boron carbide.
Excellent thermal resistance, Good thermal insulation and corrosion resistance.
Radio resistance of natural mineral stone.

-Application areas-

Daily life and radiation related facilities

 

 

2. Quartz

We have 3 kinds of quartz, Flame fused, Electrical fused and Synthetic quartz.
And also, depending the application, we have an opaque quartz.
We can provide as an ingot, block, plate, tube and ring.


 

3. Sapphire

「Sapphire : Al2O3」

It is the aluminum oxide. The monocrystal sapphire which is produced for the industry is also called sapphire glass and has a high hardness and is used not only for the surface cover of the watch and bearings but also the window of the airplane, bar-code reader and the view port of the semiconductor equipment. Also it is used as the substrate for the manufacturing of the semiconductor and LED because of the excellent properties for the insulation and thermal conductivity.

We provide the view port for semiconductor and LCD equipment mainly.

 

4. Metal Silicon

We provide the silicon ingots and block.

 

< Advanced Products Div. >

5. Ceramics products

a) Silicon Carbide (SiC)

It is the compound of the carbon and silicon. It has a good thermal conductivity and wear resistance. In addition, it also has very good hardness which is the next of the diamond and then, used for the whetstone and polishing fabric as the abrasive. And, so far, it is used as the heating element, varistor and arrester as the electric element material but recently, also used for all kinds of the diode and MOSFET as the semiconductor material.

We provide the thermal components of the diffusion and LP-CVD equipment like wafer boats and process tubes, also chucks and rings to support the silicon wafers for the etching equipment at the semiconductor manufacturing.


b) Silicon Nitride (SiN)

Silicon Nitride is non-oxide ceramics which has a good thermal conductivity and mechanical property. Silicon Nitride parts is light, good strength for high temperature, a good fracture toughness, wear resistance, corrosion resistance and thermal shock resistance. Then, will be used in the wide markets like the automotive engine parts, electronics parts, industrial mechanical parts and so on.

We provide the fine-ceramics parts and the engineering ceramics parts which are made by the unique molding methods like CIP, Slip-casing, Extrusion and so on.
Ex. Automotive engine parts, Gas-turbine parts, Bearing balls, Cutting tools, High temperature isolation parts, Corrosion resistance parts and Wear resistance parts.


c) Boron Nitride (BN)

It is the compound which consists of Boron and Nitrogen. Because of the high thermal conductivity and low thermal expansion coefficient, BN has the best thermal shock resistance among the ceramics and will not be broken even cooled down quickly from 1,500℃. And also, it has the electric insulation and easy to machine because of very soft material. So, it is called as the machinable ceramics. The applications are the lubricant and release agent.

We will do the hot-press or atmospheric sintering by using a sintering additive to make and provide the parts like crucible for the compound semiconductor manufacturing, insulator for ion implanter for the semiconductor manufacturing and the heat-sink for the electronics parts. Also can provide a fine powder for the cosmetic.


d) Boron Carbide (B4C)

-Application-
  • Abrasive Materials
  • Refractory products
  • Nuclear power
  • Nozzle for the water-jet cutter
  • Nozzle for Shot Blasting
  • Wear Resistance parts
  • ACutting tools
  • Metal composite
  • Armor
  • Brake linings for vehicles
  • Welding products
  • Others

e) Aluminum Oxide (Al203)

It is called as Alumina generally and used as the raw material for the metal aluminum normally. However, it has good properties for the hardness, high temperature melting point and electrical isolation. So, also used as the abrasive, refractory, insulators, electric parts and precision machined parts.

We provide all from small parts like pins and rings for the semiconductor equipment to the large parts like a base of LCD equipment.


f) Zirconium Oxide (ZrO2)

Usually, Zirconium will be broken by repeating of the temperature up and down. When the oxides like Calcium oxide, Magnesium oxide, Yttrium and so on is dissolved in Zirconium, it becomes to be stable and can control a broken. The Zirconium which is dissolved an oxide (called as the stabilizer) is called as “ Stabilized Zirconia” or “Partially Stabilized Zirconia”. The Stabilized Zirconia has an excellent mechanical strength and fracture toughness. However, the Partially Stabilized Zirconia which can metamorphose a bit by decreasing the amount of an oxide has much better mechanical strength than the Perfect Stabilized Zirconia which is restrained a metamorphose perfectly.

The Yttria Stabilized Zirconia has an excellent ion conductivity and then, is used for the material of Fuel Cell and Oxygen Sensor. For other applications, the Blades like a cutter and a knife, capstan and the parts of watch. And also, recently, the demand as the dental treatment like a false tooth and bridge is increasing.

 

6. Quartz Products

「Quartz(SiO2)

It is the mineral which Silicon Dioxide is crystalized and used in many kinds of industrial markets because of high purity and easy machining. There are 3 kinds of the quartz, Flame fused quartz, Electrical fused quartz and Synthetic quartz.

We provide not only the wafer boats and the process tube for the thermal process of the semiconductor manufacturing but also many parts for LCD, Optical fiber, Lighting and general optic industry. We can provide all of kinds of the quartz, fused quartz, electrical fused quartz and synthetic quartz.

 

7. Sapphire Products

「Sapphire(Al2O3)

It is the aluminum oxide. The monocrystal sapphire which is produced for the industry is also called sapphire glass and has a high hardness and is used not only for the surface cover of the watch and bearings but also the window of the airplane, bar-code reader and the view port of the semiconductor equipment. Also it is used as the substrate for the manufacturing of the semiconductor and LED because of the excellent properties for the insulation and thermal conductivity.

We provide the view port for semiconductor and LCD equipment mainly.

 

8. Electric & Electronics Equipment and Parts

a) Equipment/System

  • Used equipment for the semiconductor, LCD and solar manufacturing
  • Unit and Parts for those equipment
  • Design and manufacturing of electric/electronics unit
  • Products based on solar technology

b) Japanese electric/electronics unit and parts

  • Relays and sockets
  • Circuit Breakers
  • Power units
  • LED switches
  • Pressure gauge
  • Others

 

< Solar products Div. >

Solar Road Stud

It is only one road stud which uses the “ spherical silicon “ solar panel in the world.Spherical silicon solar cell was developed by Clean Venture 21 in Japan, and has unbreakable and flexible feature. This unique solar panel is most suitable for road stud application to endure heavy weight load and vibration on the road.If you are interested in the spherical silicon, please access to the URL of Clean Venture 21. http://www.cv21.co.jp/

  • Ultra-Durability : withstand 20 tons weight
  • High Reliability design for severe conditions. Water and Dust Ingress is IP68
  • Large capacity battery, over 72 hours operation after full charge
  • High Intensity LED for night safety
  • Patent for Spherical silicon & Certification as Kyoto Eco-Style products

There are 5 kinds of LED colors and 2 types of steady lighting or flash

  • CVRS-A series ( Standard type ) : Roadway lane edge, Car park
  • CVRS-AF series ( Ultra-thin type, 9mm thick ) : Green way, Bicycle way, Car port

Standard Non-embedded type

Ultra-thin Non-embedded typ, 9mm thickness

Standard Leg embedded type

Embedded type

 

< Japanese and China industry promotion Div. >

Sales of Japanese traditional music instrument, “Shamisen”

Sales of Chinese traditional music instrument, “Erhu”

Performance Training for Shamisen and Erhu by a professional player
https://ameblo.jp/narusenikoshamisen/

Export of Japanese high quality fruits


Earphone


docodemoSPEAKER

Bone conduct product, Earphone and Speaker

 

< Service Div. >

SERVICE : Advisor/Consultant、Research, M&A and so on

「ADVISER & Education」

To increase the reliability of your company, we will support and help.

For example, you may need to get a certification for your product but the procedure may be complex and you need some help. For other example, you may think as your employees need to get some specific education to step up further. Ex. Compliance, Risk management like BCP. We will support it.

images

「RESEARCH」

When you want to develop new business or to expand your existing business more, you will consider to do some market research in advance. We will do it instead of you.

images

「M&sA, Joint-venture」

To grow your company further, you may consider about the possibility of M&A or JV. We will do the support and help to look for an appropriate potential company.

images

 

9. Others

We are confident to look for what customer need through our worldwide network.


バナースペース

BONDS Co., LTD

4-25-1, Miyayama-cho, Toyonaka-shi, OSAKA,
560-0056,Japan

TEL : +81-6-6846-0111
FAX : +81-6-4865-7022